Water purification information

Introduction of various indexes of reverse osmosis membrane

Views : 71868
Update time : 2021-09-27 17:47:07
1. Desalination rate and salt permeability of reverse osmosis membrane
reverse osmosis membrane

Salt permeability = product water concentration / influent water concentration × 100%

Desalination rate = (1-salt content of product water / salt content of influent water) × 100%

Salt penetration rate = 100%-desalination rate

The desalination rate of the membrane element is determined when it is manufactured and formed. The desalination rate depends on the density of the ultra-thin desalination layer on the surface of the membrane element. The denser the desalination layer, the higher the desalination rate and the lower the water production.

The desalination rate of different substances by reverse osmosis is mainly determined by the structure and molecular weight of the substance. The desalination rate of high-valent ions and complex monovalent ions can exceed 99%, and the desalination rate of monovalent ions such as sodium ions, potassium ions, and chloride ions is slightly lower. , But it also exceeds 98%; the removal rate of organics with a molecular weight greater than 100 can also exceed 98%, but the removal rate of organics with a molecular weight of less than 100 is low.

2. Water production of reverse osmosis membrane
reverse osmosis membrane
Water production-refers to the water production capacity of the reverse osmosis system, that is, the amount of water permeating the membrane per unit time, usually expressed in tons/hour or gallons/day.

Permeation flow rate-is also an important indicator of the water production of reverse osmosis membrane elements. Refers to the flow rate of permeate per unit membrane area, usually expressed in gallons per square foot per day (GFD). Too high permeate flow rate will cause the water velocity perpendicular to the membrane surface to increase, which will aggravate membrane fouling.

3. Recovery rate of reverse osmosis membrane

Recovery rate-refers to the percentage of feed water converted into product water or permeate in the membrane system. Depends on the pretreatment influent water quality and water requirements. The recovery rate of the membrane system has been determined at the time of design,

Recovery rate = (product water flow/influent flow) × 100%

For large RO systems, the recovery rate is usually limited by the tendency of insoluble salt to foul, that is, by the maximum concentration of concentrated water; for small RO systems, the recovery rate is usually less than 30% to 50%. When the recovery rate is low, the RO device can operate safely without controlling the solubility of insoluble salts. Cost is usually not a priority for small RO systems.
Related News
Read More >>
Does your reverse osmosis equipment often wash the membrane, change the membrane? Does your reverse osmosis equipment often wash the membrane, change the membrane?
Sep .27.2024
Users reflecting their own purchase of reverse osmosis equipment frequently wash membrane, reverse osmosis membrane use life is short and other issues. Today Susan organized a compilation of reverse osmosis equipment for reference, welcome to exchange, correction.
Do you know what you should do when the water purification equipment has a low water output rate? Do you know what you should do when the water purification equipment has a low water output rate?
Sep .26.2024
Today, Susan will give you a detailed answer to this question: Under normal circumstances, the phenomenon of low water output rate and high voltage of water purification equipment is mainly due to It is caused by instrument readings, temperature, inlet water conductivity, potential water side pressure, pressure difference, membrane element attenuation, membrane element pollution, untimely maintenance, etc.
Do you know the difference between ultrafiltration membrane and ro reverse osmosis membrane? And How to choose them? Do you know the difference between ultrafiltration membrane and ro reverse osmosis membrane? And How to choose them?
Sep .25.2024
Ultrafiltration membrane and 0 reverse osmosis membrane are both industrial filter membrane, in the production of industrial water filtration have a great role, but these two membrane elements are different in many ways. Understand the difference between the two before you can make a better choice.